Firmware Flash Guide

To be able to connect your projects to our platform, you need to install our software (also called firmware) on your hardware. Only with this software, your microcontroller (we call this component “bridge”) is able to communicate with our platform.

The firmware is compatible with many variants of the ESP32 and ESP8266:

  • ESP-32 variants
  • ESP-32S variants
  • ESP-32 Dev Kit C
  • ESP-WROOM-32
  • ESP12 variants (ESP-12e, ESP-12f, ESP-12s,…)
  • ESP07 variants
  • NodeMCU variants (v2, v3,…)
  • WeMos D1 variants
  • and many more!
How to flash program an ESP8266 ESP12

The following instructions will help you to flash the Sensate firmware:

Hardware wiring instructions

If you don’t use a developer board like the Dev Kit C, NodeMCU or WeMos D1 Mini, you probably have to wire your chip properly first. For the ESP-12 and ESP-07 we have prepared a tutorial:

Instructions: How to prepare your ESP8266 (ESP-12) for flashing
A guide for the various ESP-32 versions will follow soon.

Programming / flashing instructions

This section describes how to load the firmware onto the chip.

Click here for our instructions for macOS and Linux
Click here for our instructions for Windows

Firmware Tools

Windows and macOS: NodeMCU pyFlasher
macOS und Linux: ESPTool

Firmware Download

Find here the firmware for microcontrollers/boards with ESP32 and ESP8266 chips

Firmware Source Code

Find here the source code for microcontrollers/boards with ESP32 and ESP8266 chips

Diese Seite ist auch auf Deutsch verf├╝gbar: Jetzt wechseln ×